Fiber Optic Connector Sm Sc/APC Drop Cable Quick Connector

Fiber Optic Connector SM SC/APC Drop Cable Fast Connector Product Description : Fiber optic fast connector  is used for field-installable optical fiber connector, widely used in Fiber To The Home (FTTH) access optical networks, not only for single-mode or multimode fiber, and can also choose to 900um,3 mm and the

Featured Products

Fiber Optic Connector SM SC/APC Drop Cable Fast Connector 

Fiber Optic Connector Sm Sc/APC Drop Cable Fast Connector

Product Description :
 
Fiber optic fast connector  is used for field-installable optical fiber connector, widely used in Fiber To The Home (FTTH) access optical networks, not only for single-mode or multimode fiber, and can also choose to 900um,3 mm and the introduction of cable buffered type. With fast installation time and low insertion loss, the connector system provides a good alternative to fusion splicing.

Installation is as easy as strip, clean, cleave cam and crimp.

Fiber Optic Connector Sm Sc/APC Drop Cable Fast Connector
 

Feature:

1. Low insertion loss
2.Low PDL
3.Good channel-to-channel uniformity
4.Wide Operating Wavelength:From 1260nm to 1650nm
5.Wide Operating Temperature:From -40
ºC to 85ºC
6.High Reliability and Stability

Fiber Optic Connector Sm Sc/APC Drop Cable Fast Connector
Fiber Optic Connector Sm Sc/APC Drop Cable Fast Connector
Fiber Optic Connector Sm Sc/APC Drop Cable Fast Connector
 

Applications :


1.Fiber to the point (FTTX)
2.Fiber to the home (FTTH)

3.Passive optical networks(PON, GEPON)
4.Local area networks (LAN)

5.Cable television (CATV)
6.Test equipment


Fiber Optic Connector Sm Sc/APC Drop Cable Fast Connector
 

Inspection:

ItemParametersItemParameters
ModeSingle modeCladding Dia250 um
Cable Scope3.0x2.0 Bow type CableFiber Dia125 um
Operating timeabout 15sInsertion loss≤0.25dB
Return loss≤-40dBContinuous success rate>98%
Assebly times>10 timesBare fiber tightening force>5N
Tensile strength>50NTemperature range-40~+85ºC
Online stretching resistance test(30N)IL≤0.3dBMechanical endurance (500 times)IL≤0.3dB
Fall-down test(on cement floor at height 4m/each direction one
time/total three times
IL≤0.3dBApplicationFTTH/FTTX/FTTB

Fiber Optic Connector Sm Sc/APC Drop Cable Fast Connector
Component list:

Back cover opening tool

Optical fiber connector back cover

Optical fiber connector body

Pin protection cap

Optical fiber connector protective jacket

 

Installation Notes :

For optical cable stripping, use sheathed cable stripping pliers to strip the sheathed cable with a length of about 60mm;

Use Miller pliers to peel off the 0.25mm coating, leaving about 24mm;

Wipe clean with absolute alcohol;

Use a fiber cleaver to cut the fiber, leaving a length of about 48mm;

Fiber Optic Connector Sm Sc/APC Drop Cable Fast Connector



Fiber positioning and fixing :

1. Screw the edge of the pin protection cap tightly and open the back cover of the optical fiber connector;

2. Use the back cover opening tool to buckle in and push forward according to the direction shown in the figure;

3. Insert the stripped optical cable into the guide hole in the middle;

4. When the outer sheath of the optical cable reaches the fixed teeth, tilt the optical cable by 30-45°;

5. Continue to push the optical cable until the core touches the ferrule protective cap;

6. Press the outer sheath of the optical cable into the tooth-shaped groove, and ensure that the optical fiber has a small amount of slight bending;

7. Close the back cover to ensure that both sides of the back cover are reliably locked;

8. Pull out the back cover opening tool; pull out the pin protection cap while screwing it.

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours